ORION Straight Sidemount
The ORION Straight Sidemount is installed on the exposed end of a top rail and mounts into a flat wall or column.
View Details
ORION II Adjustable Angle Hardware Kit
The ORION II Adjustable Angle Hardware Kit is an adjustable bottom rail bracket kit for mounting the bottom rail to angled posts on level sections. Each kit includes lower rail adjustable brackets, screws and square driver.
View Details
ORION II Straight Rail Kit
The ORION II Straight Rail Kit is the standard 6 ft. railing kit for level sections. Each kit includes a top rail, bottom rail, pre-drilled stabilizer and support block assembly.
View Details
ORION II Straight Rail Hardware Kit
The ORION II Straight Rail Hardware Kit is for mounting the bottom rail to posts on level sections. Each kit includes lower rail brackets, screws, screw hole covers and square driver.
View Details
ORION II Stair Rail Kit
The ORION II Stair Rail Kit is the standard 6 ft. railing kit for stair sections. Each kit includes a top stair rail, bottom stair rail, slotted stair stabilizer and support block assembly.
View Details
ORION II Stair Rail Hardware Kit
The ORION II Stair Rail Hardware Kit is for mounting the bottom rail to posts on stair sections. Each kit includes lower rail stair brackets, screws, screw hole covers, square driver and templates.
View Details
ORION II 42″ Cable Stabilizer
This stabilizer is designed specifically for use with the ORION II System. It is pre-drilled to match the spacing on ORION II posts.
View Details
ORION II 36” Universal Post
The ORION II 36” Universal Post is specifically for use on 36” height railing on level section. It is designed to be used as an end post or mid post.
View Details
ORION II 42” Universal Post
The ORION II 42” Universal Post is specifically for use on 42” height railing on level section. It is designed to be used as an end post or mid post.
View Details
ORION II 36” Corner Post
The ORION II 36" Corner Post is used as a corner post on 36" level sections. The corner post is pre-drilled to allow 1/8” stainless steel cable and termination hardware to pass through on one plane.
View Details
ORION II 42” Corner Post
The ORION II 42" Corner Post is used as a corner post on 42" level sections. The corner post is pre-drilled to allow 1/8” stainless steel cable and termination hardware to pass through on one plane.
View Details
ORION II 36” Corner Post w/ Insert
The ORION II 36" Corner Post w/ Insert is used as a "pass-through" corner post on 36” height level sections. The post has through-holes on 2 adjacent sides of the post to allow cable to pass through.
View Details
ORION II 42” Corner Post w/ Insert
The ORION II 42" Corner Post w/ Insert is used as a "pass-through" corner post on 42” height level sections. The post has through-holes on 2 adjacent side of the post to allow cable to pass through.
View Details
ORION II 42” Stair Mid Post, Slotted
The ORION II 42” Stair Mid Post, Slotted is used as standard mid posts on stairs. It features a slotted hole pattern to allow cable to pass through at a 29-41 degree angle range.
View Details
ORION Stair Bottom Post, Undrilled
The ORION Stair Bottom Post, Undrilled is used as the standard bottom post on stairs. It is undrilled due to stair angle variations.
View Details
ORION 42” Undrilled Post
The ORION 42” Undrilled Post is typically used as a top stair post when transitioning from a 42" level section. It is undrilled due to stair angle variations.
View Details
ORION 36” Undrilled Post
The ORION 36” Undrilled Post is typically used as a top stair post when transitioning from a 36" level section. It is undrilled due to stair angle variations.
View Details
ORION Splice Post Cap
The ORION Splice Post Cap is commonly used on mid posts to join top rails on level sections. It features female connections to allow for ORION top rails to be cut to length and concealed within the fitting.
View Details
ORION Pivoting Post Cap
The ORION Pivoting Post Cap is an adjustable fitting that is typically used on mid and bottom stair posts to join top rails on stair sections.
View Details
ORION Termination Cap
The ORION Termination Cap is installed on the unused side of a post cap fitting for a finished look. This rail cap is available in black, bronze and white colors and a matte textured finish.
View Details
ORION Rail Cap
The ORION Rail Cap is installed on the exposed end of a top rail that extends beyond the post for a finished look. It features a female connection to allow for the ORION top rail to be cut to length and concealed within the cap.
View Details
ORION Stair Knuckle
The ORION Stair Knuckle is an adjustable fitting for transitioning from 36" height rail sections to in-line stair rails.
View Details
ORION Post Mount Stair Knuckle
The ORION Post Mount Stair Knuckle is an adjustable fitting for transitioning from 42" height rail sections to in-line or perpendicular stair rails.
View Details
ORION 90 Degree Elbow Post Cap
The ORION 90 Degree Elbow Post Cap is utilized where rail sections meet at a 90 degree angle. It features female connections. The ORION Top Rails can be cut to length and concealed inside for a clean look.
View Details
ORION 60 Degree Elbow Post Cap
The ORION 60 Degree Elbow Post Cap is utilized where rail sections meet at a 60 degree angle. It features a rounded corner and female connections. The ORION Top Rails can be cut to length and concealed inside for a clean look.
View Details
ORION 45 Degree Elbow Post Cap
The ORION 45 Degree Elbow Post Cap is utilized where rail sections meet at a 45 degree angle. It features a rounded corner and female connections. The ORION Top Rails can be cut to length and concealed inside for a clean look.
View Details
Single Mount Tensioner
Single Mount Tensioners are used at each end of a cable run on stair sections to tension the cable. They can achieve angles up to 45 degrees.
View Details
NOVA Stud
Supplied with NOVA 36” and 42” corner posts, the NOVA Studs are threaded into the post and mechanically attached to the cable using simple wrenches.
View Details
