RailEasy™ Stud Assembly
The RailEasy™ Stud Assembly is used in cable railing applications on straight and angled (stair spacers are available for angles upon request) runs by drilling through the post and fixing it to the back side. Tighten locking nut to tension the cable and cut off excess thread to fit acorn nut for a finished look.
GRADE: 316L Stainless Steel
| ITEM | A (CABLE) | B | C | D | QTY | WT (LB) |
| 2-Pack | ||||||
| C0980-0004-2 | 5/32˝ | 1/4˝ – 28 | 4.50˝ | 1.50˝ | 2 | 0.25 |
| Single – 3/16˝ ONLY | ||||||
| S0980-0005 | 3/16˝ | 1/4˝ – 28 | 4.50˝ | 1.50˝ | 1 | 0.16˝ |
RELATED PRODUCTS
RailEasy™ Cable Railing Tensioner
The RailEasy™ Tensioner is the primary cable railing tensioning/fastening device.
HandiSwage™ Long Stud
The HandiSwage™ Long Stud is perfect for architectural cable railing applications where “through post” hardware is desired for minimal obstruction.
Deluxe Cover Nut Set
Designed for use with the HandiSwage™ Studs and RailEasy™ Stud Assembly.
HandiSwage™ Cutting Disk
The HandiSwage™ Cutting Disk is a high performance abrasive cutting disk used to cut threads on HandiSwage™ studs after installation.