This stabilizer kit is designed specifically for use where post to post measurement spans over 4 feet. Each kit comes with a 42" stanchion, mounting hardware, 3" hole spacing and fasteners. Cut at both ends for an accurate fit. This kit cannot be used to replace the use of a substantial mid post and should never be used in spans over 7’. Grommets are required for installation. Do not use within 1 mile of salt water.
|CABLE GROMMET||CABLE||HOLE SIZE||QUANTITY|
|CABLE STABILIZER SAFETY INFORMATION & REQUIREMENTS
Atlantis Rail Cable Stabilizers are purposed for use in maintaining code compliant cable spacing between post and rail sections with spacing greater than 4 feet between posts and not exceeding 7 feet. The Cable Stabilizer is not a structural component and is not a substitute for a post! Post and rail structure where a cable stabilizer is used should be rated and built to be structural without a cable stabilizer per building code requirements. Do not rely on the cable stabilizer to support the rail or add stability. The only function of the cable stabilizer is to maintain cable spacing. Building the railing to an appropriate code compliant structure is the sole responsibility of the user of Atlantis Rail products.
REQUIREMENTS & MAXIMUM LENGTHS FOR USING ATLANTIS RAIL CABLE STABILIZERS