Measuring your cable
Time saver! Once you have your tensioners properly set up you need to cut and measure your cable. Begin by measuring your entire run between end post (measure to the inside). Measure at top and bottom. If there is a difference of more than 1/4″ you should measure in several spots to see if this […]
Setting up tensioners for installation.
When you are measuring you cable for a run you should have your tensioner studs unthreaded 3/4 inch. If you have a long run (over 30 feet) or are attempting to use one tensioner and a stationary connector at the other end you should extend at least an additional 1/4″.
Do you have questions, comments or just looking for more information? Give us a call, or send us an email. We welcome the opportunity to assist you! Atlantis Rail Systems70 Armstrong RoadPlymouth, MA 02360 Telephone: 508-732-9191Toll free: 800-541-6829Fax: 508-732-9798Email: email@example.com If you are interested in becoming an authorized dealer, please refer to our RailEasyTM Dealer […]
About Atlantis Rail
Atlantis Rail is a leading manufacturer of premium stainless steel railing systems. The railing systems have been designed for assembly using a collection of patented railing fittings and components to allow for the delivery of turn key stainless steel railing systems at a low cost. Atlantis Rail designs and manufactures stainless steel railing systems to […]